Loading...
Twin Sleeper Chair – Healthy Style

Twin Sleeper Chair

Loading...

DIY twin sleeper chair – free how to plans by ANA-WHITE.com

Loading...

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it’s appreciated by all!

Add your project.

Author Notes:
Our guest room is really coming along!

We’ve DIYed it all – the Farmhouse bed, the nightstands, the sign, the end of bed benches that look like luggage racks.

But every guest room needs a side chair. And since I dread sewing so much, my plan had been to buy a chair for our guest room. But then I had this wild idea …. what if I built a chair that flipped forward in half, and became a bed?

Soooo…. here’s how it all went down –

We love our new chair! It’s quite sturdy and comfortable as a chair, and just right for an extra guest in our guest room.

The chair has a very modern look (but you could use the same idea but different style to create a more tradditional twin sleeper chair).

To convert to a bed, simply set the cushions aside and pull back of chair forward (so you don’t even have to move the chair when converting it to a bed)

Then just bring the front flat to the floor. It is heavy, but nothing I can’t manage entirely by myself.

Another reason for this styling was I wanted a compartment in the chair for storing bedding that is very easy to access. Bedding and bed pillows can take up quite a bit of space, so having a built in storage space is crucial.

Then you replace those exact same cushions on the bed and add the bedding and it’s a bed!

Many of our guests have small children, so having this extra bed option is great in our guest room.

Especially when it acts as a very comfortable and sturdy chair when not in use.

We spent about $100 on this chair. The cushion cost $20 (it’s a camp pad) – make sure you watch the video for more details on it and how we sewed the cushions.

We are so excited to be able to share these plans with you, and truly can’t wait to see you build (and outbuild) us!

Enjoy the plans following,

Ana

Twin Sleeper Chair Plans

We used the same finish as the luggage rack benches –

Varathane Aged Wood Accelerator in Rustic Brown. It is a true neutrel brown and goes on blotch free and beautiful.

Shopping List:
5 – 2×8 @ 10 feet long

1 – 2×4 @ 4 feet long (could also use 2×8 scraps)

1 – 2×2 @ 4 feet long

1 – 1×2 @ 10 feet long

4 – 1×4 @ 8 feet long

1 – 1/4″ plywood @ 33″ x 30″ (for heaver loads, use 1/2″ or 3/4″ plywood)

1 – Camp Foam pad, medium to firm, 72″ x 30″

6 – 8″ long screws, long drill bit for predrilling

2-3/4″ self tapping wood screws (about 25)

2 sets of hinges (one should be heavy duty)

1 handle

1 1/4 inch finish nails
1-1/4″ Pocket Hole Screws
2-1/2″ Pocket Hole Screws
Elmer’s Wood Glue
Elmer’s Wood Filler
120 grit sandpaper
Tools:
Tape Measure
Speed Square

Carpenter’s Pencil

Safety Glasses

Hearing Protection

Kreg Jig

Drill

Circular Saw

Compound Miter Saw

Brad Nailer

Power Sander

Drill Bit Set

Dimensions:

Dimensions shown above. The chair is very large, and may not fit through doorways. We installed the hinge in the final room.
Cut List:
6 – 2×8 @ 30″ – frame fronts/backs

8 – 2×8 @ 36″ – frame sides

4 – 2×4 @ 13″ – bottom frame corners

2 – 2×2 @ 26″ – bottom frame cleats

1 – 1/4″ plywood @ 33″ x 30″ (for heaver loads, use 1/2″ or 3/4″ plywood)

2 – 1×2 @ 30″ – bottom frame top pieces

2 – 1×2 @ 26-1/2″ – bottom frame slat cleats

5 – 1×4 @ 29-1/2″ – bottom frame slats

6 – 1×4 @ 30″ – top frame slats

FOAM 30″ x 72″

cut one piece to seat dimensions

cut leftover piece in half

Step 1:
Make two full frames out of 2x8s, joining corners with 1-1/2″ pocket holes and 2-1/2″ pocket hole screws.

Step 2 Instructions:
Stack frames on top and attach at corners with 2x4s. Elevate 2x4s so there is a 3/4″ gap on top and bottom.

TIP: 1x material is 3/4″ thick and can be used as a spacer.

Step 3 Instructions:
Attach in between 2x4s the 2×2 cleats with 2-3/4″ self tapping screws and glue.

Step 4 Instructions:
Flip project over.

Cut plywood panel with circular saw or tablesaw.

Screw to bottoms of 2x4s.

Step 5 Instructions:
Flip back over.

Place 1x2s on top of 2x4s.

Nail and glue with 1-1/4″ nails (can also use 1-1/4″ screws)

Step 6 Instructions:
Build the slat lid as shown, attaching with 1-1/4″ fasteners and glue. Make sure the frame is square (I constructed mine inside the chair frame to make sure it was square).

Step 7 Instructions:
Hinge frame to the 1×2.

This completes the bottom frame build. Set aside.

Step 8 Instructions:
Attach remaining frame 2x8s at corners with pocket holes. Stack on top. Drill holes with a long drill bit and countersink 8″ screws to attach the two frames together, two screws per side.

Step 9 Instructions:
Attach slats to frame with 3/4″ pocket holes and 1-1/4″ pocket hole screws.

Step 10 Instructions:
Hinge the two frames together with the heavy duty hinge.

Step 11:
Add a handle on the back.

Step 12:
Cut the foam with a sharp knife. Cover foam in fabric (I used polar fleece since it’s stretchy, thick, and cheap)

Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *